Panigale V2: a "track-ready" package
Even on the Panigale V2, the complete, non-homologated exhaust system is undoubtedly the most relevant accessory when it comes to track use. This is a titanium Termignoni unit (96482461AA), with a dual exhaust under the tailpipe like the standard configuration, but in this case consisting of two black-finished mufflers with a carbon fibre end cap. In addition to a weight saving of 4.5 kg, its greatest impact is on engine performance, which is significantly improved: +4.5 Nm and +5.5 HP. The exhaust must be paired with the compatible right-hand lower fairing (97181391AA), designed to maintain the bike's clean lines even in this configuration.
 

To maximize the Panigale V2's on-track capabilities and customize the riding position to your needs, you can install adjustable footpegs (96282121AA) and sporty clip-on handlebars (96282141AA). The former, developed by Ducati Corse and Rizoma, are made of billet anodized aluminium: they stand out both for the possibility of adjustment to multiple positions and for the articulated footrests, rear brake lever and gear lever, designed to minimize the risk of breakage in the event of a slide. The sporty clip-on handlebars, mounted below the upper triple clamp, feature a track-optimized geometry and allow for a more racing riding position.
 

For maximum control, an adjustable Öhlins steering damper (96282131AA) is also available. Its usefulness however isn't limited to the track, where speeds and accelerations are extreme: thanks to its adjustable stiffness, this component allows for further refinement of the bike's stability, especially on less-than-ideal surfaces.
 

All these accessories can also be purchased as part of the Time Attack package (97981501AA). It includes all the other components needed to complete the transformation of the Panigale V2 in track trim, which can also be purchased individually: covers and plugs for the holes left by the removal of the license plate holder and mirrors (97181301AA and 97382271AA), as well as carbon fibre guards for the clutch and alternator covers (96982031AA and 96982041AA).
 

Finally, for those seeking an even more radical transformation, a complete set of track fairings (97181421AA) is the ideal solution. A perfect replica of the standard bodywork, unpainted and complete with the connectors needed to disable the headlights. The final racing touch is an oversized windshield (97181411AB), for increased aerodynamic protection in all conditions.
 

The entire range of accessories is available on Ducati.com, where you can use the "Configurator" section to prepare your Ducati for the track, then share the selected components and packages with your nearest dealer.